点击图片查看原图
| 是否提供加工定制： | 是 | 品牌： | 天宏兴业 |
| 型号： | THM-10S | 打印速度： | 9000mm/s |
| 打印范围： | 150*150（mm） | 打印深度： | 0.2（mm） |
| 打印高度： | 210（mm） | 类型： | 激光打码机 |
| 打印方向： | 双向打印 | 适用工件： | 皆可 |
| 包装类型： | 瓶,杯,箱,管,桶,碗,利乐包,易拉罐,其他 | 气源压力： | 0.1（MPa） |
| 重量： | 80（kg） | 外形尺寸： | 780*620*980（mm） |
| 自动化程度： | 全自动 | 适用行业： | 化工,家纺,礼品、工艺品,食品,玩具,五金、机械,其他 |
高速光纤激光打标机
THM-10S系列高速光纤激光打标机是采用国际最先进的光纤激光器研制成的新一代光纤激光打标机系统，整机体积小巧，输出光束质量好，标刻精度极高，深度好。采用风冷方式冷却，10万小时免维修运行。广泛应用于对光洁度、精细度高的标记领域，如钢、铜、铝、金银等大部分金属、塑料、陶瓷、电子器材，适用于钟表、模具、位图打标、包装、医疗、烟草、洁具、食品、电子、礼品等行业，是高速精密标刻的的最佳选择。
技术参数：
设备型号 THM-10S
激光介质掺镱光纤
激光功率 10W
激光波长 1055-1070nm
重复频率 20-100KHZ
打标幅面 150×150mm
标刻线速 ≤12000mm/s
最小线宽 0.012mm
最小字符 0.1mm
重复精度 ±0.003mm
整机最大功率 400W
供电电源 AC220V/50HZ
工作环境： 温度5~28℃,湿度<80%
外型尺寸（长×宽×高） 900×720×1250mm
重量 100KG
选配器件：
1、旋转头 D80 D50
2、雕刻范围（mm） 70*70 110*110 150*150
光纤打标机优点：
1、优质的光束质量：光纤激光器的光斑和发散角比传统激光器的更小，标记精密度高。
2、使用成本低廉：电光转换率高，整机耗电不到500W，是灯泵浦激光器的1/10。
3、免维护操作：激光器无需进行任何维护，也不用调节和清洁镜片。
4、使用寿命长：使用激光二极管做为泵浦源，其工作时间长达10万小时。
5、体积小，结构紧凑封闭，采用光纤传输，在较高温度，湿度等恶劣环境下也能正常工作。
6、加工速度快：是传统激光打标机的2到3倍。
应用领域：应用于对深度、光滑度、精细度要求较高的领域，首饰、饰品打标、纸品包装打标、汽车配件打标、电子五金打标、卫生洁具打标、玻璃制品打标、位图打标、可在金属，塑料等精美的图案。
fiber laser marking machine
THM-10S series high-speed fiber laser marking machine adopts the internationally fiber laser for the development of a new generation of fiber laser marking system. It has many advantages as follows: machine is smart, the quality of output beam is good, the accuracy of marking is very high and the depth is nice. It can be maintenance-free operation for a long time with using air-cooling method.. It is widely used in mark field of smooth finish and high precision, such as steel, copper, aluminum, gold and silver, and most other metals, plastics, ceramics, electronic equipment. And be suitable for watches and clocks, mold, bitmap marking, packaging, health care, tobacco, Sanitary Ware, food, electronics, gifts and other industries It is the best choice of high-speed precision marking.
technical parameters:
Model THM-10S
Laser ytterbium-doped fiber
Laser Power 10W
Laser Wavelength 1055-1070nm
Laser Repetition Rate 20-100KHZ
Marking Area 110×110mm
Marking Wire-speed ≤12000mm/s
The Min. line Width 0.012mm
The Smallest Characters 0.1mm
The Repeat Accuracy ±0.003mm
The Whole Power 400W/500W
Power Supply AC220V/50HZ
Work environment： Temperature:5~28℃, humidity<80%
Dimension(Length×Width×Height ) 900×720×1250mm
Weight 100KG
Option device:
1. Rotary fixture D80 D50
2. Marking Area(mm) 70*70 110*110 150*150
Advantage of fiber laser marking machine:
1. Excellent beam quality: The laser spot and divergence angle of fiber laser marking machine is smaller than
traditional marking machine, marking more precision
2. Low use-cost: high turnover ratio between electricity and laser, the whole machine power consumption is less than 500W, which is 1/10 of light pumping source laser.
3. Maintenance-free Operation: There is no need of any maintenance for laser, or to adjust /clean the lens.
4. Long working life: using laser diode as pumping source, the working hours can reach as long as 100,000 hours.
5. Small machine body can be used in severe environment: using fiber to realize laser transport and the structure is compact, which makes possible to work under severe environment such as vibration, high-temperature.
6. High processing speed: 2-3 times of the traditional laser marking machine.
Applied Field :Widely used in the field of high requirements of depth, Smoothness and precision, such as jewelry, decoration, paper packing, auto parts, electronic hardware, sanitary, glass and bitmap. It can also works on metal and plastic surface.
